aluminium name plate manufacturers solar pv panels and the derating of output by sam braidley

by:ShunDing     2019-06-02
The capacity of the solar photovoltaic panel is the same as the capacity in its nameplate.The output is always a DC power output in Watts.The Watt output of the PV panel array must be converted to a kw (DC) utility unit, for which purpose the total volume of the total Watt (DC) PV module array is divided by 1000.
Sadly, due to several factors that reduce the output, this output also does not show the final ability you can use for useful work.The nameplate details of the resulting DC power supply are measured under standard test conditions (STC.Now, this does not match the conditions for the highly variable location of the average building for most of the time.
For the convenience of comparison, STC simply sets up a public platform.It is strange that there may be two different STCs depending on the country and the authorities in charge.The widely used STC is the standard set by the U.
S.
Department of Energy's nrcl laboratory.
The following are the influencing factors of many factors.PV module nameplate DC rating due to degradation and other reasons, the nameplate details are inconsistent with the on-site measurement readings.The joint efficiency of the inverter and the transformer DC to AC conversion is the joint action transformer of the inverter (solid state equipment) and the natural power loss in the process from the photovoltaic module to the building power distribution board.
PV module manufacturers note the performance tolerances in their catalog.The performance of each module varies within the tolerance range, and when connected to each other, the total nameplate output may not be generated.The diode and the connecting diode ensure that the current is one-way in the PV panel.
In addition, a large number of electrical connections generate resistance, resulting in energy loss.Both help to reduce the performance of the system.DC wiring these are the reasons for the loss of DC wiring resistance between PV panel installation and inverter.
x95 AC wiring-The reduction is due to the loss of the AC line between the inverter and the grid connection.Dirt such as dust, snow and bird feces stain the photovoltaic module and reduce the installation performance.System availability downtime for PV arrays and utilities due to maintenance and other reasons.
Affects the output of the system.
The performance of photovoltaic arrays is easily affected by surrounding buildings, vegetation, etc.x95 Sun-When a tracking mechanism is adopted (usually not for small capacity installation due to cost), precise positioning of solar modules is important to maintain optimal efficiency.x95 Age -Over the years, the efficiency of the photovoltaic array has been affected, and in about 10 years of operation, it may be reduced by about 10%.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: