benefits of laser engraving Directions for Installing a Urinal

by:ShunDing     2019-05-28
When designing a new home or bathroom renovation, the homeowner almost never thought the urinal was a plumbing device.Since the urinals are much cheaper to install and use than traditional toilets, many homeowners are now rethinking this equipment as a potential addition to the bathroom.Many lamp manufacturers now maintain a residential production line with beautiful designuse models.
Other benefits of installing this fixture at home include: hygienic design that can be cleaned quickly, low maintenance costs, and potential space savings.It's easy to install the urinal using simple hand tools.Provide structural support directly behind the finished wall at the location of the installation of the urinal.
Unless the device will be fixed directly with a bolt on the wall post, use 1-inch, weather-It is recommended to use treated plywood behind the drywall.Before starting the installation, make sure the plywood is fully fixed on the wall post.Use the provided template to determine the location of the drain, wall-mounted and water supply.
Paste the template to the wall in the desired position to make sure it is horizontal.The edge height of the urinal is traditionally 24 inch of the height of the floor, but may change depending on the user's preferences.Guided by the steel mesh, carefully mark all the positions on the wall with a pencil.
Remove the template.
Drill 1/4-Install the inch pilot hole of the wall hanging screw.Using a drywall saw, simply remove enough drywall to modify the water supply and waste water line to leave the wall at the desired location.Modify the water supply and wastewater lines so that they leave the walls at the desired location.
Carefully check the position of the templates by keeping them on the wall aligned with the drill wall mounting holes.Use the screws provided to install the urinal wall mount in place.Be sure to screw them firmly to the wall and screw them to the wood stand behind the wall.
Use the carpenter level as a reference to verify whether the hanger is horizontal.Adjust as needed.Connect the supplied outlet connection to the existing waste pipe using PVC cement.Adjust the position of the socket connection so that it is located exactly where it is marked on the wall with a template.
If the drywall needs to be removed, fix the template in the appropriate position and check the location carefully.Carefully keep the urinal above the wall hang and align the urinal outlet accessory located on the wall with the waste opening behind the urinal.Lower the urinal to the hanger.Tighten the connecting screw carefully to secure the urinal firmly on the wall.
Don't tighten too much because the porcelain surface is easy to crack.Connect the flush valve unit to the top of the urinal using the supplied inlet spud.Spud should be located between the flush valve and the urinal and will slide into place only if properly positioned.
Tighten the flushing valve safely and use the supplied rubber gasket carefully to prevent water seepage.Connect the water supply to the wash valve and test if there is dripping water and leakage in the connection.If any leakage is found, adjust the Flushing Valve as needed.
The urinal is now available.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: