epoxy resin stickers wholesale How to Fix Cracks in a Snowboard

by:ShunDing     2019-06-03
If you are proud of your ability to turn the slope, you know that there are damaged planks on this land.Cracks, tears, and separation can cause the skateboard you trust to break and lead to dangerous snowboard conditions.While asking about snowboard shops can be the best option for professional care, you can try some tips at home to save money.After a little practice, a small beginning --To increase the cost, you can learn to repair your own circuit board like an expert.Description difficulty: properly locate the damage and evaluate the depth of the crack.Cover the whole board with a damp cloth and remove dirt and excess pieces of board.Clean the cracks using a cotton swab with rubbing alcohol, old cloth or deep grooves.Mix the epoxy adhesive onto the aluminum foil and follow the individual instructions on the back of the product.Use a hair dryer to heat the epoxy until it becomes soft and can be applied.Pay attention to the monitoring process and do not overheat or burn the product.Apply epoxy resin to the damaged area by stirring with tongue pressing board, wood paint or clean wood blocks.Fill the cracks and completely cover the damaged area.Epoxy resin allowed in 24-hour period.Use a hair dryer or heater to speed up the process.Use C-The clip keeps the plate sealed and keeps working for 24 hours.For big cracks, let the board dry for at least 48 hours.If C-Clips cannot be used, please use tape.After the epoxy drying is done, you carefully take out the C-Clip, polish your board.Take a small piece of worn-out sandpaper and wipe off the excess epoxy.This will prevent the boards from being caught in the snow.Wax your board.This will help smooth the board and eliminate any additional epoxy build-up.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: