Guangdong metal copybook nameplate electroforming factory design-Metal signage manufacturer

by:ShunDing     2020-07-24
Guangdong metal copybook nameplate electroforming factory design

Why is the stainless steel badge mentioned by most customers not stainless steel? Because there are many processes that cannot be achieved by using stainless steel to make badges, stainless steel generally only makes some etching or printing processes, and both processes are basically flat, or the etching is only slightly concave and convex, so that the effect that the customer wants cannot be achieved, and it will inevitably be completed by stamping or die casting, but both processes cannot be made of stainless steel. Metal particles are sintered and formed by high temperature heating. This process does not require machine processing, and the utilization rate of raw materials can reach 97%. Different metal powders can be used to fill different parts of the mold. Solid molding solid molding processing: refers to the raw materials used are some metal strips, sheets and other solid forms that can be molded at normal temperature.

with the continuous improvement of people's living standards, people have higher and higher requirements for visual design of signs; In the design of metal signs, it is not only required to be beautiful but also to reflect the information conveyed to people by the products of the enterprise, so that people can think of the Enterprise when they see the logo of the trademark, what kind of products are suitable for what style, what material of signs, so that people are more easy to remember; For example: Home appliances, electronic digital products, most of the choice of gold or silver logo, material selection: stainless steel or nickel material!

roof sign: refers to a plate-shaped live cube-shaped or magic sign that is set on the roof of a building and hung or pasted on it. Column signs: horizontal, vertical and three-dimensional signs marked on some fixed structures on the ground. Sudden sign: a sign that protrudes on the wall surface of a building and is used as a carrier on both sides except for the whole side of the building or when there are walls on both sides.

influenced by its chemical structure, the chemical structure is stable compared with aluminum. Under the same conditions and environment, stainless steel is not easy to oxidize, rust and deform. Therefore, most of the users who need to keep the signs bright and beautiful for a long time under the conditions of long-term outdoor exposure to rainwater or wet, cold and high temperature environment choose to use stainless steel materials. In short, the stainless steel sign is characterized by durability and not easy to deform. Characteristics of aluminum signs: in terms of manufacturing process, the manufacturing of aluminum signs is much simpler and more convenient than that of stainless steel signs.

Guangdong metal copybook nameplate electroforming factory design

aluminum plate is cheaper than stainless steel plate, and because the manufacturing process of aluminum label is relatively simple and fast, there is no complicated manufacturing process of stainless steel signs, so the manufacturing cost is also low. Metal signs are signs that can be seen everywhere in our daily life and can be found in many products or places; For example: mobile phones, computers, electronic digital products, household appliances, gift box packaging, bags, leather goods, cards, indication signs, etc. Commodity decoration: for example, the sign decoration of electronic products, household appliances, luggage, gift boxes and other commodities highlights the cultural concept given by the Enterprise to the commodities and a quality hint given to customers, let people think of the company and the products produced by the company as soon as they see the trademark.

The manufacturing process of nickel sheet thin standard is to use the cathode deposition phenomenon in the electrochemical process to carry out molding processing, that is, the conductive original mold is used as the cathode, the Electroformed Metal is used as the anode, and the metal salt solution of the electroforming material is used as the electroforming liquid. Under the action of direct current, the metal plate at the anode will gradually dissolve into metal ions, which will be continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.

high wear-resistant micro-deformation cold deformation die steel is represented by Cr12Mov type, which is a high-performance cold deformation die steel widely used abroad. Cr12Mov is an improved Cr12 steel. The carbon content is too high, resulting in serious uneven large bulk carbides. Cr12Mov steel is characterized by high wear resistance and hardenability. It is a micro-deformation cold blanking die. The main material of cold heading die is still widely used in general factories. The modified material has high hardness and high wear resistance, high hardenability, especially small deformation after heat treatment, good filing performance during pliers processing, is still widely used in blanking forming dies, drawing dies and other dies.

such as 6W6Mo5Cr4V2, the specific heat treatment process is quenching heating temperature 1160-1180 ℃, after cooling, after 550- Tempering at 570 ℃ for three times, hardness Rc60- 63, used for cold extrusion punch or cold heading punch can double the service life. Matrix Steel: Matrix Steel is another way to improve the toughness of high speed steel. Compared with high speed steel, Matrix Steel has few excess carbides and fine carbide particles, the distribution is uniform, so the impact toughness and fatigue strength are better than that of high speed steel, while maintaining good wear resistance. Matrix Steel successfully developed and popularized in China.

Guangdong metal copybook nameplate electroforming factory design

nickel material electroforming products, providing thickness of 0. Natural 20 ± 0. 05mm. Can provide model products, semi-finished products processing. Electroforming is a special processing method that uses the electrolytic deposition principle of metal to process some complicated or special shape workpieces. It is a special application of electroplating. Electroforming was mainly used for metal art and printing plates. It was used to manufacture record Stampers at the end of the 19th century. After that, the application scope gradually expanded.

nickel sheet label manufacturing process; Photosensitive development photosensitive: The operator first checks whether the film has yarn eyes and scratches, and the yarn eyes are in diameter of 0. Below 5MM and the scraping diameter is 0. Less than 2MM can be repaired with a black pen, and too large yarn holes and scratches are directly scrapped; Check the exposure machine glass for black spots and dust, and if any, clean it.


It has become necessary for DongGuan ShunDing Hardware Products Co., LTD to continually cultivate, develop and update their skills to work successfully alongside high-tech.
Deliver value to our customers by providing the most reliable and efficient products as Journalism.
According to the latest social survey, more than 50 percent of consumers (across all age demographics) follow a brand before purchasing a product. Therefore, ShunDing's content can make or break a customer's decision to conduct business with you.
Depending on the scale of the service, DongGuan ShunDing Hardware Products Co., LTD might also need to hire and manage an overseas workforce and comply with regulatory requirements.
DongGuan ShunDing Hardware Products Co., LTD affords you a suitable low price for proving our ethical considerations.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: