stainless steel sticker How to Glue Stainless Steel to Drywall

Stainless steel is an ideal tailgate option when you are ready to update your kitchen.The stainless steel tailgate is usually a tile that you stick to the wall separately, although you can cut a large piece of steel to install and screw in place.Stainless steel tiles may be solid, flat or tile with textures and patterns that can add size to your kitchen.You can also mix it with tiles made of other metals, such as copper.Slide down a long height along the wall to make sure there is no big depression in the wall.Stainless steel tiles show defects on the walls, so these problems should be solved before laying the tiles.Apply the seam compound with putty knife to the sunken area of the wall.Let the compound dry and then polish with sand so the walls are flat.Wipe the dust clean with a wet rag or vacuum cleaner.Let the wall dry if you use a wet rag.Squeeze out a small amount of building adhesive on the back of the first stainless steel tile.For smaller tiles, add a big drop to each corner, about 1 inch from the corner.For larger tiles, apply a line in a zigzag pattern along the center of the tile.Press the tile against the dry wall and keep it in place for a few seconds.Stick it to the dry wall with the painter's tape to hold it firmly when the dry wall dries.Apply glue on the next tile and push it to the wall.Stick it in place until the glue dries.Continue to use the remaining tiles.If there is no drywall display, paste the tile to the line below.