Sign factory introduction screen printing plates plating method of screen printing plates are widely used in electronic products, household appliances, machinery and civil products, etc.
Printing plate produced mainly in copper, iron, aluminum, zinc alloy, titanium, stainless steel raw materials, such as, on the basis of -
- - - - - -
> sign factory introduction screen printing plates plating method of screen printing plates are widely used in electronic products, household appliances, machinery and civil products, etc.
Printing plate produced mainly in copper, iron, aluminum, zinc alloy, titanium, stainless steel raw materials, such as as the foundation, through stamping, die-casting, etching, printing, enamel, imitation enamel, paint, plastic, electroplating, etc.
However, in the process of printing plate making, by the master good plating method is also is important.
Printing plate electroplating method is what?
Specific signs factory is introduced as follows: (
In screen printing signs semi-finished products reserved places, drill a hole, the copper wire to tie up through the holes in a short period, on the other side to set aside enough length;
The laser stripe metal label
of semi-finished products in the degreasing solution, tied the end of the copper wire on the copper pipe, make good contact with copper wire and copper pipe, ensure good conductive, 58 degrees, the temperature is set to adjust time into 300 seconds, current set to 10, remove the laser stripe sign of semi-finished products, in the distilled water rinse clean;
The electric lifting oil after laser stripe metal sign of semi-finished products, in the nickel chloride solution, set the temperature is 25 degrees, time was 300 seconds, current of 10, in distilled water rinse clean;
In laser stripe metal sign semi-finished copper wire clip on a conductive clip, then put the laser stripe metal plate semi-finished products in the in a solution of potassium cyanide gold, and set the temperature of 52 degrees, time for 30 seconds, the current is 5, let the silver plating metal sign back and forth in the solution, take out after zui in distilled water rinse clean.
DongGuan ShunDing Hardware Products Co., LTD is devoted to satisfy our customers with a wide array of the finest using experience.
Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is Journalism, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.
Apart from this, exhibit myriad custom name tags benefits, like the prevention of custom name tags by enhancing custom name tags.