loading

Professional metal name plate manufacturer in China since 2006. DongGuan YongFu Hardware  Co., LTD

Email: kelly.jiang@yfnameplate.com

Dongguan personalized electroforming label electroforming factory quality and low price-Metal signage manufacturer

Dongguan personalized electroforming labeling electroforming manufacturers are of good quality and low price

More than 95% of badges are made by stamping and die casting processes, these two processes can be used to make some badges with a very three-dimensional feeling, especially die-casting is suitable for Super three-dimensional or 3D three-dimensional badges. As the world's steel producer and the world's most populous country, China has the advantage of low cost of raw materials and labor for manufacturing hardware products. In recent years, China's exports of hardware products have maintained a stable growth trend, china has become the world's major exporter of hardware products, and it is expected that the annual export volume will remain at 10-15% growth. The analysis report on the development prospect and strategic planning of hardware products industry shows that in 2010, China's hardware products industry recovered throughout the year. In general, the hardware products industry is running well, the growth momentum of domestic and foreign sales is obvious, the import and export is growing at a high speed, and various economic indicators have basically returned to the previous level.

Dongguan personalized electroforming label electroforming factory has good quality and low price directional curing: it can produce very strong super heat-resistant alloy with excellent fatigue resistance and pour it into the model, then through the strict control of heating and cooling process to eliminate any small defects plastic forming plastic forming processing refers to the molding metal high temperature heating for re modeling is labor intensive production. Plastic Molding classification: Forging: it is a simple and ancient metal molding process to shape metal by beating and squeezing under the conditions of cold working or high temperature operation. Binding: the high-temperature metal blank section passes through several continuous cylindrical rollers, which tie the metal into the mold to obtain the preset shape.

It belongs to labor-intensive production. The cost of processing can be relatively low. Solid forming processing classification spinning: A very common processing method for producing circular symmetrical parts, such as dishes, cups and cones. During processing, push the high-speed rotating metal plate closer to the model on the same rotating and fixed lathe to obtain the preset shape. This process is suitable for batch production.

what types of glue are commonly used in the use of metal signs? How is the glue correct and what type of sign or product is used? In the use of metal signs, we often use four kinds of glue: water glue, hot melt glue, back glue and four-dimensional glue. Water glue is a kind of liquid glue. The surface is colorless and transparent, and it is not easy to turn yellow. It is an environment-friendly chemical. It has good adhesive strength at normal temperature and is convenient to use. The release paper that tears the label can be directly attached to the product; Commonly used in electronic digital products, furniture, gift boxes, household appliances and other products.

roof sign: refers to setting some fixed structures on the roof of a building, A plate-shaped living cubic or magic sign hung or pasted on it. Column signs: horizontal, vertical and three-dimensional signs marked on some fixed structures on the ground. Sudden sign: a sign that protrudes on the wall surface of a building and is used as a carrier on both sides except for the whole side of the building or when there are walls on both sides.

The manufacturing process of nickel sheet thin standard is to use the cathode deposition phenomenon in the electrochemical process to carry out molding processing, that is, the conductive original mold is used as the cathode, the Electroformed Metal is used as the anode, and the metal salt solution of the electroforming material is used as the electroforming liquid. Under the action of direct current, the metal plate at the anode will gradually dissolve into metal ions, which will be continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.

high wear-resistant micro-deformation cold deformation die steel is represented by Cr12Mov type, which is a high-performance cold deformation die steel widely used abroad. Cr12Mov is an improved Cr12 steel. The carbon content is too high, resulting in serious uneven large bulk carbides. Cr12Mov steel is characterized by high wear resistance and hardenability. It is a micro-deformation cold blanking die. The main material of cold heading die is still widely used in general factories. The modified material has high hardness and high wear resistance, high hardenability, especially small deformation after heat treatment, good filing performance during pliers processing, is still widely used in blanking forming dies, drawing dies and other dies.

technological process of making nickel sheet label II. Cleaning steel plate and steel plate is the carrier when making nickel label. Steel plate can be recycled, and one plate can be repeatedly electroplated 2000 times, each reuse must be cleaned and polished. Operation Guidance: The operator turns on the switch of the grinding machine and holds the stainless steel plate with both hands to make it close to the nylon wheel; Move left and right up and down, polish the stainless steel to make it bright and flat, and visually check the surface for nickel spots, letter marks and scraping. Polished stainless steel is placed in clear water to avoid oxidation of stainless steel plates.

To live up to our responsibilities to serve and enhance the communities in which DongGuan ShunDing Hardware Products Co., LTD works and lives and the society on which we depend.

is making its name in professional custom name tags all over the world, and with DongGuan ShunDing Hardware Products Co., LTD taking great care to make an excellent product & actively involved in keeping the industry well-regulated, it's a product that should make its way into your custom name tags.

With a few simple , and a little bit of custom name tags, you to can handle custom name tags on your own.

Journalism is attracting a great positive feedback from the customers. And many of our clients are fully satisfied with it.

Regularly improving Journalism in accordance with customer feedback is a great way to show your brand listens and cares.

GET IN TOUCH WITH Us
recommended articles
INFO CENTERS APPLICATION News
Current is generated during the production of corrosion signs, and the corrosion process is a primary battery working process.
The brand factory is very worried about stainless steel materials? There are still two trading days left this month, which has reached the end of the month.
PVC film is characterized by soft texture and easy pasting.
There are many reasons for the impact of silk screen signs.
Just look at it and heat it to 15 ~ 30 degrees, 3 development: with a good developer (This kind of drudgery is basically done by the administrator.
After the completion of the production of aluminum alloy signs, in order to avoid the occurrence of scratches, scratches, paint, fading, bumps and other phenomena on the surface of aluminum alloy signs during transportation or use, it is necessary to do a comprehensive product surface protection work.
Electroforming sign: the characteristics of electroforming is the biggest characteristic of sign making no carrier.
Sign color etching technique and the technology is available in stainless steel plate, titanium plate and other metal plating (
Especially the mirror metal)

Surface random henceforth have its official photos and all kinds of graphics, text, image, vivid, lifelike, amazing, fondle admiringly. One, the working condition at present, our country career in nameplate of the unit, according to online data is not completely calculated h
When making metal signs, stainless steel and aluminum are very common metal materials, so what is the difference between stainless steel signs made of them and aluminum signs?
Stainless steel plate has stable structure, firmness and durability, and is not easy to deform;
Stainless steel has strong corrosion resistance, acid and alkali resistance and oxidation resistance, and is not easy to rust.
In normal life, stainless steel signs can be seen everywhere.
no data

CONTACT US

Contact Person: Kelly Jiang

Fixed Line: +86-769-26627821

Fax: +86-769-22676697

Whatsapp / Phone: +86 139-2921-2779

Email: kelly.jiang@yfnameplate.com

Address: No. 46, Zhouwu Wenzhou Road, Dongcheng District, Dongguan City, Guangdong Province, China

BETTER TOUCH, BETTER BUSINESS.

Contact sales at YongFu Hardware.

Call Us

+86-13929212779

Copyright © 2025 Dongguan YongFu hardware Products Co., LTD | Sitemap
Customer service
detect