Dongguan pure nickel signage manufacturer integrity and mutual benefit-Metal signage manufacturer

Dongguan personalized electroforming labeling factory

Industry metal products industry also encountered some difficulties in the development process, such as single technology, low technical level, lack of equipment, shortage of talents, etc, this has restricted the development of the metal products industry. To this end, we can improve the development of the metal products industry by improving the technical level of enterprises, introducing technical equipment, and cultivating suitable talents. In 2009, products in the metal products industry will tend to be more and more diversified, the technical level of the industry will be higher and higher, the product quality will be steadily improved, and the competition and market will be further rationalized. Hardware products auxiliary and accessory finished products used in daily life and industrial production. Sand mold casting: low cost, small batch, can process complex shapes, but may require a large number of post-processing procedures. Investment casting/lost wax casting: this processing method has high continuity and degree, and metal products can also be used to process complex shapes. On the premise of relatively low processing cost, it can achieve perfect surface effect and is suitable for mass production.

metal particles are sintered at high temperature. This process does not require machine processing, and the utilization rate of raw materials can reach 97%. Different metal powders can be used to fill different parts of the mold. Solid molding solid molding processing: refers to the raw materials used are some metal strips, sheets and other solid forms that can be molded at normal temperature.

small signage nameplates are not made of aluminum, because products such as logo signage nameplates made of aluminum are not as delicate as stainless steel, the gloss is relatively poor, and the surface of the aluminum label is easily scratched and polished. Stainless steel sign stainless steel sign stainless steel sign its material is 304 stainless steel, has good resistance to atmospheric and freshwater medium corrosion performance, and through corrosion, polishing, drawing after the decorative effect is very high-grade and beautiful. Stainless steel signs are generally divided into concave signs, convex signs and concave-convex signs.

receiving engineering drawings according to CDR, AI or cad format engineering drawings provided by customers, according to size, color, thickness, glue and other process requirements to order, logo design in the drawings any line size width shall not be less than 0. 25mm (For example, the I word is only 0. , Then the drawings must be changed, or communicate with the customer to change the size, otherwise the size is too small, it is difficult to take it down during the shipping process, resulting in the improvement of defective products) After confirming the drawings, we will first make samples and send samples to the customer for confirmation. After confirmation by the customer, the order will be made.

clear water after OK, and wait for full inspection after drying. The pickup operator removes the excess waste from the electroformed stainless steel surface, puts the steel plate in the material rack, and dips the material rack into the deinking tank. The temperature in the tank is kept at 45 ℃ ~ 60 ℃, soaking time 10 ~ 15 minutes. After OK, take it out and rinse the ink on the surface of the steel plate with clear water.

spray painting is a painting method that uses an air compressor to spray color pigments onto the screen. Its advantage is that the color particles are delicate and soft, the light processing is subtle and the material is vivid and vivid. Flat Panel printing is a high-tech digital printing equipment of ink-jet printing type that 'does not contact with objects'. It can print color patterns on the surface of any material, whether simple block color patterns or full color patterns, or a pattern with a transitional color can be printed at one time.

However, with the increased prevalence of Journalism, it has become far more affordable.

DongGuan ShunDing Hardware Products Co., LTD’s mission is to be the leading global innovator, developer and provider of Journalism custom name tags products, systems, and services.

While manufacturing Journalism, we always pay attention to the technology and quality of the product.

To find a qualified at reasonable price, contact DongGuan ShunDing Hardware Products Co., LTD at ShunDing Metal Nameplate, a professional provider and tell them what you envision for your Journalism.