Hunan conductive material manufacturers integrity-Metal signage manufacturer

Hunan conductive material manufacturer integrity

2. Construct regional signs with sexual conception and improve the overall quality of the environment. Standardization Factors with the continuous improvement of people's living standards, people have higher and higher requirements for visual design of signs; In the design of metal signs, it is not only required to be beautiful but also to reflect the information conveyed to people by the products of the enterprise, so that people can think of the Enterprise when they see the logo of the trademark, what kind of products are suitable for what style, what material of signs, so that people are more easy to remember; For example: Home appliances, electronic digital products, most of the choice of gold or silver logo, material selection: stainless steel or nickel material!

Hunan conductive material manufacturer integrity

Like split signs or signs with small lines are not suitable for adhesive backing, which has strong adhesion, good retention, strong temperature resistance and good waterproof performance are environmentally friendly chemicals. Four-dimensional glue commonly used in digital products, household appliances, furniture, mechanical equipment, car key chains and other products is a glue with strong viscosity among these common glues.

Hunan conductive material manufacturer integrity, office building office building identification signs, is a modern identification guidance system as a static identification symbol of the environment, it is an important indication of connecting people in daily life. Due to the multi-element alloy, the carbide Dispersion strengthening after solid solution strengthening and tempering is better, with high toughness, high impact fatigue resistance. Used for pneumatic tools, punching tools and large and medium-sized punching dies. The disadvantages are low compression resistance, poor thermal stability and difficult control of quenching deformation. For CrWzSi steel, when Shearing (Such as 5CrW2Si) High temperature heating quenching should be used as far as possible to change the shape of martensite and greatly improve its strength and toughness, which the author has achieved good results in practical work.

The basic principle of electroforming is to use the original mold made according to the required shape as the cathode and the electroforming material as the anode, put them together in the same metal salt solution as the anode material and pass direct current. Under the action of electrolysis, a metal electroforming layer is gradually deposited on the surface of the original mold, and the metal electroforming layer is taken out of the solution after reaching the required thickness, and the electroforming layer is separated from the original mold, the metal parts corresponding to the shape of the original mold are obtained. The stability of nickel plating layer in air is very high. Due to the strong passivation ability of metal nickel, a very thin passivation film can be rapidly formed on the surface to resist the corrosion of atmosphere, alkali and some acids.

receiving engineering drawings according to CDR, AI or cad format engineering drawings provided by customers, according to size, color, thickness, glue and other process requirements to order, logo design in the drawings any line size width shall not be less than 0. 25mm (For example, the I word is only 0. , Then the drawings must be changed, or communicate with the customer to change the size, otherwise the size is too small, it is difficult to take it down during the shipping process, resulting in the improvement of defective products) After confirming the drawings, we will first make samples and send samples to the customer for confirmation. After confirmation by the customer, the order will be made.

out of the film: the film is the transliteration of the film. It is used for printing and plate making. The printing is called film, film, film, and is used for printing, in the past, the printing was a lead plate. Now it is arranged on the computer and then out of the film. The printed content is on the film, and then the content on the film is exposed to the steel plate through the exposure of the plate machine.

nickel sheet label manufacturing process; Photosensitive development photosensitive: The operator first checks whether the film has yarn eyes and scratches, and the yarn eyes are in diameter of 0. Below 5MM and the scraping diameter is 0. Less than 2MM can be repaired with a black pen, and too large yarn holes and scratches are directly scrapped; Check the exposure machine glass for black spots and dust, and if any, clean it.

clear water after OK, and wait for full inspection after drying. The pickup operator removes the excess waste from the electroformed stainless steel surface, puts the steel plate in the material rack, and dips the material rack into the deinking tank. The temperature in the tank is kept at 45 ℃ ~ 60 ℃, soaking time 10 ~ 15 minutes. After OK, take it out and rinse the ink on the surface of the steel plate with clear water.