Key points of mold retouching 1

1. Size. In the first item before the drawing is repaired, the artwork provided by the customer should be changed to the actual size required by the customer. 2. The minimum coloring area is generally 1pt (About 0. 35mm) In order to ensure smooth coloring, it is best not to be less than 0. 35mm. In the process of coloring, if the coloring area is too small, it will bring great difficulties to coloring and increase the cost of the badge. After coloring, the board should be wiped to deal with the residual color paste on the metal line when coloring. If the space is too small, the depth of the space will be too shallow. Related label: Commemorative coin

Most people who see a in operation for the first time are amazed at how well the custom name tags is managed.

For more information please see our site at ShunDing Metal Nameplate. Don't be hesitate to contact us!

In a nutshell, is actually an ultimate solution for custom name tags and underestimating its value cost you higher than anything else. So grab it before you miss the boat.