Professional metal name plate manufacturer in China since 2006. DongGuan YongFu Hardware Co., LTD
Email: kelly.jiang@yfnameplate.com
Maoming split nickel standard integrity
why do most customers say that the stainless steel badge is not stainless steel? Because there are many processes that cannot be achieved by using stainless steel to make badges, stainless steel generally only makes some etching or printing processes, and both processes are basically flat, or the etching is only slightly concave and convex, so that the effect that the customer wants cannot be achieved, and it will inevitably be completed by stamping or die casting, but both processes cannot be made of stainless steel. Standardization Factors with the continuous improvement of people's living standards, people have higher and higher requirements for visual design of signs; In the design of metal signs, it is not only required to be beautiful but also to reflect the information conveyed to people by the products of the enterprise, so that people can think of the Enterprise when they see the logo of the trademark, what kind of products are suitable for what style, what material of signs, so that people are more easy to remember; For example: Home appliances, electronic digital products, most of the choice of gold or silver logo, material selection: stainless steel or nickel material!
The integrity of Maoming split nickel standard
is affected by its chemical structure. Compared with aluminum material, its chemical structure is stable. Under the same conditions and environment, stainless steel is not prone to oxidative rust deformation. Therefore, most of the users who need to keep the signs bright and beautiful for a long time under the conditions of long-term outdoor exposure to rainwater or wet, cold and high temperature environment choose to use stainless steel materials. In short, the stainless steel sign is characterized by durability and not easy to deform. Characteristics of aluminum signs: in terms of manufacturing process, the manufacturing of aluminum signs is much simpler and more convenient than that of stainless steel signs.
Maoming split nickel standard integrity, aluminum plate is cheaper than stainless steel plate, and because the manufacturing process of aluminum plate is relatively simple and fast, there is no complicated manufacturing process of stainless steel plate, therefore, the production cost is also low. Metal signs are signs that can be seen everywhere in our daily life and can be found in many products or places; For example: mobile phones, computers, electronic digital products, household appliances, gift box packaging, bags, leather goods, cards, indication signs, etc. Commodity decoration: for example, the sign decoration of electronic products, household appliances, luggage, gift boxes and other commodities highlights the cultural concept given by the Enterprise to the commodities and a quality hint given to customers, let people think of the company and the products produced by the company as soon as they see the trademark.
The manufacturing process of nickel sheet thin target is to use the cathode deposition phenomenon in the electrochemical process to carry out molding processing, I . e. the conductive original mold is used as the cathode, using Electroformed Metal as anode and metal salt solution of electroforming material as electroforming solution, under the action of direct current, the metal plate at anode will gradually dissolve into metal ions, it is continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.
SiMnMo series Graphite Steel is characterized by high Si content. Under the action of strong graphitization element Si, some carbon exists in graphitization state, the steel has self-lubricating effect, high bite resistance, good machinability and wear resistance, small heat treatment deformation and stable size. SiMnMo steel is used to make bending, stretching and punching dies with strict surface quality requirements, which can significantly improve the quality of punching parts.
Maoming split nickel standard integrity, the basic principle of electroforming is to use the original mold made in advance according to the required shape as the cathode and the electroforming material as the anode, put them together in the same metal salt solution as the anode material and pass direct current. Under the action of electrolysis, a metal electroforming layer is gradually deposited on the surface of the original mold, and the metal electroforming layer is taken out of the solution after reaching the required thickness, and the electroforming layer is separated from the original mold, the metal parts corresponding to the shape of the original mold are obtained. The stability of nickel plating layer in air is very high. Due to the strong passivation ability of metal nickel, a very thin passivation film can be rapidly formed on the surface to resist the corrosion of atmosphere, alkali and some acids.
The receiving engineering drawings are customized according to the CDR, AI or cad format engineering drawings provided by customers and the technological requirements such as size, color, thickness, glue, etc, the logo design in the drawing shall not be less than 0. 25mm (For example, the I word is only 0. , Then the drawings must be changed, or communicate with the customer to change the size, otherwise the size is too small, it is difficult to take it down during the shipping process, resulting in the improvement of defective products) After confirming the drawings, we will first make samples and send samples to the customer for confirmation. After confirmation by the customer, the order will be made.
in some electronic products, large machinery, customers like to use stainless steel signs. Based on the use environment of stainless steel signs, customers are generally recommended to choose water glue. Water Gel high temperature resistance 80 ° C, low temperature resistance- At 40 ℃, the label can be directly placed in the reserved position in the product during operation. Other frequently used glues include adhesive, Sun glue, etc. Engineers will choose the appropriate glue according to the customer's use environment for the label. No matter what kind of glue, we will try our best to meet the needs of customers and provide them with quality brand services.
Looking for an innovative range of custom name tags Journalism products? DongGuan ShunDing Hardware Products Co., LTD supplies a diverse range of consumer, commercial and specialty industrial products including Journalism, custom name tags, custom name tags,etc.Click ShunDing Metal Nameplate to learn more!
is a custom name tags Journalism provided by DongGuan ShunDing Hardware Products Co., LTD which is a leading manufacturer in China. For more information, visit ShunDing Metal Nameplate.
ShunDing is designed to enhance your savings in terms of cost, energy and efforts.If you are interested in our Journalism custom name tags products, please contact us soon.
CONTACT US
Contact Person: Kelly Jiang
Fixed Line: +86-769-26627821
Fax: +86-769-22676697
Whatsapp / Phone: +86 139-2921-2779
Email: kelly.jiang@yfnameplate.com
Address: No. 46, Zhouwu Wenzhou Road, Dongcheng District, Dongguan City, Guangdong Province, China
BETTER TOUCH, BETTER BUSINESS.
Contact sales at YongFu Hardware.
Call Us
+86-13929212779