loading

Professional metal name plate manufacturer in China since 2006. DongGuan YongFu Hardware  Co., LTD

Email: kelly.jiang@yfnameplate.com

Maoming sun-resistant label manufacturers integrity-Metal signage manufacturer

Maoming sun-resistant label manufacturers integrity

designers need to make unified planning according to the regional environment and atmosphere of different cities, so as to systematize their functions, achieve the effect of information transmission with creative and well-formed visual sequences. Casting method: used to process complex shapes with high errors. Due to the characteristics of the process itself, the product does not need post-treatment after Molding. However, the advantage of low cost can only be shown in the case of mass production. Die casting method: the processing cost is high, and the cost is reasonable only in the case of mass production. However, the cost of the final product is relatively low and the error is relatively high. Can be used to produce parts with thin wall thickness. Rotary casting is an ideal method for processing small parts and is usually used in jewelry manufacturing. Rubber models can be used to reduce the cost of processing.

The appearance design of metal signs should generally pay attention to various factors such as humanization, standardization, coordination between products and environment, etc, what are the factors that affect the appearance design of metal signs. Humanized factors the appearance design of metal signs should be combined with the actual situation, sensory vision, and design according to local conditions, reflecting the people-oriented concept and improving customer satisfaction, such: the sign design of scenic spots should reflect the service concept of humanization, individuation and characteristic on the whole and in detail, so as to greatly enhance the reputation of scenic spots.

So what kinds of glue are commonly used in the use of metal signs? How is the glue correct and what type of sign or product is used? In the use of metal signs, we often use four kinds of glue: water glue, hot melt glue, back glue and four-dimensional glue. Water glue is a kind of liquid glue. The surface is colorless and transparent, and it is not easy to turn yellow. It is an environment-friendly chemical. It has good adhesive strength at normal temperature and is convenient to use. The release paper that tears the label can be directly attached to the product; Commonly used in electronic digital products, furniture, gift boxes, household appliances and other products.

powder metallurgy is suitable for producing products with the same shape and large quantity, especially products with high processing cost such as gears. The production cost can be greatly reduced by powder metallurgy. Disadvantages: the size of parts should be considered without batch. The cost of the mold is relatively higher than that of the casting mold. Powder Metallurgy (P/M) Technology is an important material preparation and forming technology, which is called the key to solve the problems of high technology and new materials . . . . High performance, high performance, net near forming has always been an important research topic for powder metallurgy workers. Powder metallurgy method can realize less cutting and no cutting of workpieces. It is a high-quality, precise, low-consumption and energy-saving technology for manufacturing parts.

chemical stability of the integrity material of Maoming sun-resistant label manufacturer: stainless steel has the properties of high temperature resistance, acid and alkali resistance, corrosion resistance, oxidation resistance, etc, affected by the chemical structure of stainless steel, in harsh environments, such as high temperature, wet and cold, and long-term exposure to rainwater, the stainless steel label can remain bright and beautiful for a long time without deformation. In short, it is characterized by strong annual use and not easy to deform. In the choice of making metal signs, stainless steel and aluminum are very common metal materials, so what is the difference between the advantages and disadvantages of these two materials?

The manufacturing process of nickel sheet thin target is to use the cathode deposition phenomenon in the electrochemical process to carry out molding processing, I . e. the conductive original mold is used as the cathode, using Electroformed Metal as anode and metal salt solution of electroforming material as electroforming solution, under the action of direct current, the metal plate at anode will gradually dissolve into metal ions, it is continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.

Maoming sun-resistant label manufacturer integrity high wear-resistant micro-deformation cold deformation die steel is represented by Cr12Mov type, this is a high-performance cold deformation die steel widely used. Cr12Mov is an improved Cr12 steel. The carbon content is too high, resulting in serious uneven large bulk carbides. Cr12Mov steel is characterized by high wear resistance and hardenability. It is a micro-deformation cold blanking die. The main material of cold heading die is still widely used in general factories. The modified material has high hardness and high wear resistance, high hardenability, especially small deformation after heat treatment, good filing performance during pliers processing, is still widely used in blanking forming dies, drawing dies and other dies.

technological process of making nickel sheet label II. Cleaning steel plate and steel plate is the carrier when making nickel label. Steel plate can be recycled, and one plate can be repeatedly electroplated 2000 times, each reuse must be cleaned and polished. Operation Guidance: The operator turns on the switch of the grinding machine and holds the stainless steel plate with both hands to make it close to the nylon wheel; Move left and right up and down, polish the stainless steel to make it bright and flat, and visually check the surface for nickel spots, letter marks and scraping. Polished stainless steel is placed in clear water to avoid oxidation of stainless steel plates.

GET IN TOUCH WITH Us
recommended articles
INFO CENTERS APPLICATION News
Current is generated during the production of corrosion signs, and the corrosion process is a primary battery working process.
The brand factory is very worried about stainless steel materials? There are still two trading days left this month, which has reached the end of the month.
PVC film is characterized by soft texture and easy pasting.
There are many reasons for the impact of silk screen signs.
Just look at it and heat it to 15 ~ 30 degrees, 3 development: with a good developer (This kind of drudgery is basically done by the administrator.
After the completion of the production of aluminum alloy signs, in order to avoid the occurrence of scratches, scratches, paint, fading, bumps and other phenomena on the surface of aluminum alloy signs during transportation or use, it is necessary to do a comprehensive product surface protection work.
Electroforming sign: the characteristics of electroforming is the biggest characteristic of sign making no carrier.
Sign color etching technique and the technology is available in stainless steel plate, titanium plate and other metal plating (
Especially the mirror metal)

Surface random henceforth have its official photos and all kinds of graphics, text, image, vivid, lifelike, amazing, fondle admiringly. One, the working condition at present, our country career in nameplate of the unit, according to online data is not completely calculated h
When making metal signs, stainless steel and aluminum are very common metal materials, so what is the difference between stainless steel signs made of them and aluminum signs?
Stainless steel plate has stable structure, firmness and durability, and is not easy to deform;
Stainless steel has strong corrosion resistance, acid and alkali resistance and oxidation resistance, and is not easy to rust.
In normal life, stainless steel signs can be seen everywhere.
no data

CONTACT US

Contact Person: Kelly Jiang

Fixed Line: +86-769-26627821

Fax: +86-769-22676697

Whatsapp / Phone: +86 139-2921-2779

Email: kelly.jiang@yfnameplate.com

Address: No. 46, Zhouwu Wenzhou Road, Dongcheng District, Dongguan City, Guangdong Province, China

BETTER TOUCH, BETTER BUSINESS.

Contact sales at YongFu Hardware.

Call Us

+86-13929212779

Copyright © 2025 Dongguan YongFu hardware Products Co., LTD | Sitemap
Customer service
detect