Quanzhou metal hollow copybook electroforming factory design-Metal signage manufacturer

Shenzhen multi-color signage manufacturers specialize in

More than 95% of badges are made by stamping and die casting processes, these two processes can be used to make some badges with a very three-dimensional feeling, especially die-casting is suitable for Super three-dimensional or 3D three-dimensional badges. Industry metal products industry also encountered some difficulties in the development process, such as single technology, low technical level, lack of equipment, shortage of talents, etc. , which restricted the development of metal products industry. To this end, we can improve the development of the metal products industry by improving the technical level of enterprises, introducing technical equipment, and cultivating suitable talents. In 2009, products in the metal products industry will tend to be more and more diversified, the technical level of the industry will be higher and higher, the product quality will be steadily improved, and the competition and market will be further rationalized. Hardware products auxiliary and accessory finished products used in daily life and industrial production.

Shenzhen multi-color label manufacturer is specialized in directional curing: it can produce very strong super heat-resistant alloy with excellent fatigue resistance and pour it into the model, then through the strict control of heating and cooling process to eliminate any small defects plastic forming plastic forming processing refers to the molding metal high temperature heating for re modeling is labor intensive production. Plastic Molding classification: Forging: it is a simple and ancient metal molding process to shape metal by beating and squeezing under the conditions of cold working or high temperature operation. Binding: the high-temperature metal blank section passes through several continuous cylindrical rollers, which tie the metal into the mold to obtain the preset shape.

metal particles are sintered and formed by high temperature heating. This process does not require machine processing, and the utilization rate of raw materials can reach 97%. Different metal powders can be used to fill different parts of the mold. Solid molding solid molding processing: refers to the raw materials used are some metal strips, sheets and other solid forms that can be molded at normal temperature.

adhesive backing is not suitable for signs like split signs or signs with small lines. Adhesive backing has strong adhesion, good retention and strong temperature resistance, it has good waterproof performance and belongs to environmentally friendly chemicals. Four-dimensional glue commonly used in digital products, household appliances, furniture, mechanical equipment, car key chains and other products is a glue with strong viscosity among these common glues.

The manufacturing process of nickel sheet thin target is to use the cathode deposition phenomenon in the electrochemical process to carry out molding processing, I . e. the conductive original mold is used as the cathode, using Electroformed Metal as anode and metal salt solution of electroforming material as electroforming solution, under the action of direct current, the metal plate at anode will gradually dissolve into metal ions, it is continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.

Shenzhen multicolor label manufacturer specializes in SiMnMo Graphite Steel, which is characterized by high Si content. Under the action of strong graphitization element Si, part of carbon exists in graphitization state, which makes steel have self-lubricating effect, high bite resistance, good machinability and wear resistance, small heat treatment deformation and stable size. SiMnMo steel is used to make bending, stretching and punching dies with strict surface quality requirements, which can significantly improve the quality of punching parts.

such as 6W6Mo5Cr4V2, the specific heat treatment process is quenching heating temperature 1160-1180 ℃, after cooling, after 550- Tempering at 570 ℃ for three times, hardness Rc60- 63, used for cold extrusion punch or cold heading punch can double the service life. Matrix Steel: Matrix Steel is another way to improve the toughness of high speed steel. Compared with high speed steel, Matrix Steel has few excess carbides and fine carbide particles, the distribution is uniform, so the impact toughness and fatigue strength are better than that of high speed steel, while maintaining good wear resistance. Matrix Steel successfully developed and popularized in China.

electroplating nickel crystal is extremely fine and has excellent polishing performance. The polished nickel coating can obtain a mirror-like luster appearance while maintaining its luster in the atmosphere for a long time. Therefore, the plating layer is often used for decoration. The hardness of nickel coating is relatively high, which can improve the wear resistance of product surface. Nickel plating layer is commonly used in printing industry to improve the hardness of lead surface.

receiving engineering drawings according to CDR, AI or cad format engineering drawings provided by customers, according to size, color, thickness, glue and other process requirements to order, logo design in the drawings any line size width shall not be less than 0. 25mm (For example, the I word is only 0. , Then the drawings must be changed, or communicate with the customer to change the size, otherwise the size is too small, it is difficult to take it down during the shipping process, resulting in the improvement of defective products) After confirming the drawings, we will first make samples and send samples to the customer for confirmation. After confirmation by the customer, the order will be made.

take the film and stick it to stainless steel. Be careful not to stick it backwards when attaching it. The side of the film is facing down and placed on the glass; Turn on the lamp tube, vacuumizing time is 25±5 seconds, and exposure time is 28±3 seconds; The exposure is completed and transported to the development workshop via the transmission output port. Development: The operator dips the exposed stainless steel plate into the developing liquid and puts 4 ~ 6 tablets.

DongGuan ShunDing Hardware Products Co., LTD outfits our businesses with Journalism because they're relatively affordable and highly customizable.

DongGuan ShunDing Hardware Products Co., LTD is committed to supplying the consumer and our customers with the finest, high-quality products and to leading the industry in Journalism custom name tags.

DongGuan ShunDing Hardware Products Co., LTD will need to find one that fits our needs and budgets, and still turns out a quality product.

DongGuan ShunDing Hardware Products Co., LTD knew if this worked for us, it would work for others, so we took the exclusive product and program and re-developed it to be more accessible to customers.