Screen printing label factory introduced silk-screen label production equipment maintenance

Screen printing label factory introduced silk-screen label production equipment maintenance of 1, screen printing signs the active parts should be smooth, outstanding fastener connection is firm, each part of the lock view without exception is switched on for operation. 2, screen printing signs of its pressure - in the operation of the machine - - - - - - > screen printing label factory introduced silk-screen label production equipment maintenance of 1, screen printing signs the active parts should be smooth, outstanding fastener connection is firm, each part of the lock view without exception is switched on for operation. 2, screen printing signs in the operation of the machine on its pressure, noise, vibration, oil temperature and pressure plate temperature control goal to supervise and check, such as system pressure beyond 7 mpa will form the motor heating, the oil temperature is too high, should be check the cleaning. 3, hydraulic air filter and oil filter cleaning once a month, to protect oil dredge, machine cleaning once per class. 4, hydraulic oil in the tank should often keep normal 45 l, after the new boot because some oil into the oil tank and pipeline, please pay attention to again make up the oil, often do check the liquid level, to make up for the same trademark oil at any time. 5, the hydraulic oil to keep clean, the oil temperature to the right ( Usually the oil temperature is 35 ~ 600 c) Each job to replace once half a year. 6, 7 mpa overflow valve factory has set in, not at liberty to assemble. Unless your machine must work under the condition of the low pressure can be screen printing signs factory professional and technical personnel, please. 7, because the overflow valve is set at 7 mpa, so ( 4) The upper limit ( Red needle) Can only be set under 7 mpa, beyond the readings will not work, with lower limit, Green needle) The gap with the ceiling should be greater than or equal to zero. 5 mpa, or make up for the pressure relay will happen often, the machine will not be able to function properly. 8, screen printing signs electrical some of the system have independent safety ( Silk) 。 If discover some one can't normal operation, please opened the electric cabinet has displayed for each safety fuse, so to be replaced. 9, screen printing signs factory introduce device, to well qualified earthed power socket, can screen printing plate processing production, to ensure safety.