Shanxi pure nickel signage factory design-Metal signage manufacturer

Shanxi pure nickel label manufacturers design

More than 95% of the badges are stamping and die casting processes, which can make some badges with a very three-dimensional feeling, in particular, die-casting is suitable for ultra-stereoscopic or 3D badges. Industry metal products industry also encountered some difficulties in the development process, such as single technology, low technical level, lack of equipment, shortage of talents, etc. , which restricted the development of metal products industry. To this end, we can improve the development of the metal products industry by improving the technical level of enterprises, introducing technical equipment, and cultivating suitable talents. In 2009, products in the metal products industry will tend to be more and more diversified, the technical level of the industry will be higher and higher, the product quality will be steadily improved, and the competition and market will be further rationalized. Hardware products auxiliary and accessory finished products used in daily life and industrial production.

standardization factors with the continuous improvement of people's living standards, people have higher and higher requirements for visual design of signs; In the design of metal signs, it is not only required to be beautiful but also to reflect the information conveyed to people by the products of the enterprise, so that people can think of the Enterprise when they see the logo of the trademark, what kind of products are suitable for what style, what material of signs, so that people are more easy to remember; For example: Home appliances, electronic digital products, most of the choice of gold or silver logo, material selection: stainless steel or nickel material!

The design of Shanxi pure nickel label factory

It is not suitable for adhesive backing like split label or label with small lines. Adhesive backing has strong adhesion, good retention, strong temperature resistance and good waterproof performance are environmentally friendly chemicals. Four-dimensional glue commonly used in digital products, household appliances, furniture, mechanical equipment, car key chains and other products is a glue with strong viscosity among these common glues.

roof sign: refers to setting some fixed structures on the roof of a building, A plate-shaped living cubic or magic sign hung or pasted on it. Column signs: horizontal, vertical and three-dimensional signs marked on some fixed structures on the ground. Sudden sign: a sign that protrudes on the wall surface of a building and is used as a carrier on both sides except for the whole side of the building or when there are walls on both sides.

Features of stainless steel: Making of stainless steel signs; Stainless steel signs are generally made of 201, 202 and 304 stainless steel, and the manufacturing process is corrosive (Also known as 'etching '), Engraving, laser, silk screen, etc. Under the conditions of exquisite modern surface style and extremely high precision requirements, etching process is often used in the manufacture of stainless steel signs, the etched surface has the characteristics of concave-convex stereoscopic impression, smooth surface and high precision. Stable chemical reaction structure; Stainless steel has the characteristics of high temperature resistance, acid and alkali resistance, corrosion resistance and oxidation resistance.

Shanxi pure nickel label factory designed that the manufacturing process of nickel sheet thin label is based on the cathode deposition phenomenon in the electrochemical process, that is, the conductive original mold is used as the cathode, the Electroformed Metal is used as the anode, and the metal salt solution of the electroforming material is used as the electroforming liquid. Under the action of direct current, the metal plate at the anode will gradually dissolve into metal ions, which will be continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.

The basic principle of electroforming is to use the original mold made according to the required shape as the cathode and the electroforming material as the anode, put them together in the same metal salt solution as the anode material and pass direct current. Under the action of electrolysis, a metal electroforming layer is gradually deposited on the surface of the original mold, and the metal electroforming layer is taken out of the solution after reaching the required thickness, and the electroforming layer is separated from the original mold, the metal parts corresponding to the shape of the original mold are obtained. The stability of nickel plating layer in air is very high. Due to the strong passivation ability of metal nickel, a very thin passivation film can be rapidly formed on the surface to resist the corrosion of atmosphere, alkali and some acids.

The receiving engineering drawings are customized according to the CDR, AI or cad format engineering drawings provided by customers and the technological requirements such as size, color, thickness, glue, etc, the logo design in the drawing shall not be less than 0. 25mm (For example, the I word is only 0. , Then the drawings must be changed, or communicate with the customer to change the size, otherwise the size is too small, it is difficult to take it down during the shipping process, resulting in the improvement of defective products) After confirming the drawings, we will first make samples and send samples to the customer for confirmation. After confirmation by the customer, the order will be made.

The production process of nickel sheet label; Photosensitive development photosensitive: The operator first checks whether the film has yarn eyes and scratches, and the yarn eyes are in diameter of 0. Below 5MM and the scraping diameter is 0. Less than 2MM can be repaired with a black pen, and too large yarn holes and scratches are directly scrapped; Check the exposure machine glass for black spots and dust, and if any, clean it.

design drawings for more than ten years, Changsha aioni has been striving for perfection in production technology in order to make perfect signboards and fulfill the heavy responsibility entrusted by the demand side. Ioni's production factory introduces some specific production processes for everyone to learn and understand, so that you can know it: metal shearing, bending, welding and stamping our production factory produces through shearing machines, bending machines, welding machines and other equipment.

Building a brand as ShunDing from the very start is simple so long as you keep 'the three C's' in mind: clarity, consistency and constancy.

have become more diverse in appearance and function thanks to the advanced technology. Choose a that you can trust to deliver an excellent user experience reliable performance at ShunDing Metal Nameplate.

can be used in a wide variety of ways.