loading

Professional metal name plate manufacturer in China since 2006. DongGuan YongFu Hardware  Co., LTD

Email: kelly.jiang@yfnameplate.com

Shanxi signage factory-Good quality and low price-Metal signage manufacturer

Shanxi bottle body label design

More than 95% of the badges are stamping and die casting processes, which can make some badges with a very three-dimensional feeling, in particular, die-casting is suitable for ultra-stereoscopic or 3D badges. As the world's steel producer and the world's most populous country, China has the advantage of low cost of raw materials and labor for manufacturing hardware products. In recent years, China's exports of hardware products have maintained a stable growth trend, china has become the world's major exporter of hardware products, and it is expected that the annual export volume will remain at 10-15% growth. The analysis report on the development prospect and strategic planning of hardware products industry shows that in 2010, China's hardware products industry recovered throughout the year. In general, the hardware products industry is running well, the growth momentum of domestic and foreign sales is obvious, the import and export is growing at a high speed, and various economic indicators have basically returned to the previous level.

The appearance design of metal signs generally requires many factors such as humanization, standardization, coordination between products and environment, etc. What are the factors that affect the appearance design of metal signs. Humanized factors the appearance design of metal signs should be combined with the actual situation, sensory vision, and design according to local conditions, reflecting the people-oriented concept and improving customer satisfaction, such: the sign design of scenic spots should reflect the service concept of humanization, individuation and characteristic on the whole and in detail, so as to greatly enhance the reputation of scenic spots.

Shanxi bottle body label design, then in the use of metal signs, what types of glue are commonly used? How is the glue correct and what type of sign or product is used? In the use of metal signs, we often use four kinds of glue: water glue, hot melt glue, back glue and four-dimensional glue. Water glue is a kind of liquid glue. The surface is colorless and transparent, and it is not easy to turn yellow. It is an environment-friendly chemical. It has good adhesive strength at normal temperature and is convenient to use. The release paper that tears the label can be directly attached to the product; Commonly used in electronic digital products, furniture, gift boxes, household appliances and other products.

these signs that can be seen everywhere are made of different materials and processes, the focus of this article is also to introduce the material classification of signs and their main application fields, so that you can distinguish different materials when purchasing signs and have a general understanding of the process and cost. Plastic signs plastic signs we usually see outside electric cars, bicycles are used to plastic signs, hotels and other public places can also see a lot of plastic signs, as well as plastic business cards and so on. Plastic signs are generally made of plastic and screen printed.

high wear-resistant micro-deformation cold deformation die steel is represented by Cr12Mov type, which is a high-performance cold deformation die steel widely used abroad. Cr12Mov is an improved Cr12 steel. The carbon content is too high, resulting in serious uneven large bulk carbides. Cr12Mov steel is characterized by high wear resistance and hardenability. It is a micro-deformation cold blanking die. The main material of cold heading die is still widely used in general factories. The modified material has high hardness and high wear resistance, high hardenability, especially small deformation after heat treatment, good filing performance during pliers processing, is still widely used in blanking forming dies, drawing dies and other dies.

such as 6W6Mo5Cr4V2, the specific heat treatment process is quenching heating temperature 1160-1180 ℃, after cooling, after 550- Tempering at 570 ℃ for three times, hardness Rc60- 63, used for cold extrusion punch or cold heading punch can double the service life. Matrix Steel: Matrix Steel is another way to improve the toughness of high speed steel. Compared with high speed steel, Matrix Steel has few excess carbides and fine carbide particles, the distribution is uniform, so the impact toughness and fatigue strength are better than that of high speed steel, while maintaining good wear resistance. Matrix Steel successfully developed and popularized in China.

receiving engineering drawings according to CDR, AI or cad format engineering drawings provided by customers, according to size, color, thickness, glue and other process requirements to order, logo design in the drawings any line size width shall not be less than 0. 25mm (For example, the I word is only 0. , Then the drawings must be changed, or communicate with the customer to change the size, otherwise the size is too small, it is difficult to take it down during the shipping process, resulting in the improvement of defective products) After confirming the drawings, we will first make samples and send samples to the customer for confirmation. After confirmation by the customer, the order will be made.

The design soaking time of Shanxi bottle body label should not exceed 1 minute, and ink will easily fall off if the time is too long; Gently wipe the developing surface with sponge until it is formed; Rinse the surface with clear water, visually check the surface for any miscellaneous spots, scraping and ink dropping. If the development is not sufficient, heavy work is required, and other poor development is directly scrapped. Nickel Plate Production Process 8, nickel plating 1. The operator puts the developed stainless steel plate into the electroforming tank for electroforming; The electroforming time of nickel is 180 30 minutes and the voltage is 2. 75 ± 0. 75 V, current 135 ± 35A (Depending on the number of stainless steel placed), Electroforming groove weight: 22. 5 ± 2. 5, the temperature in the tank is 55 5℃, PH = 4. 4 ± 0. 6.

clear water after OK, and wait for full inspection after drying. The pickup operator removes the excess waste from the electroformed stainless steel surface, puts the steel plate in the material rack, and dips the material rack into the deinking tank. The temperature in the tank is kept at 45 ℃ ~ 60 ℃, soaking time 10 ~ 15 minutes. After OK, take it out and rinse the ink on the surface of the steel plate with clear water.

Clouds of custom name tags failures surround the world of custom name tags in particular, simply because people don’t pay as much attention to the Journalism as they should do.

ShunDing is the vital link in the supply chain, adding value with efficient and cost-effective service and solutions for our customers and our suppliers.

With innovative technology, our professionals can spend more time focused on strategies that will improve Journalism’s quality and deliver a more positive customers experience.

DongGuan ShunDing Hardware Products Co., LTD harnesses science and technology to create products that support safer and healthier living and that enhance the overall quality of life.

comes in a vast array of styles and custom name tags depending on which custom name tagsis used.

GET IN TOUCH WITH Us
recommended articles
INFO CENTERS APPLICATION News
Current is generated during the production of corrosion signs, and the corrosion process is a primary battery working process.
The brand factory is very worried about stainless steel materials? There are still two trading days left this month, which has reached the end of the month.
PVC film is characterized by soft texture and easy pasting.
There are many reasons for the impact of silk screen signs.
Just look at it and heat it to 15 ~ 30 degrees, 3 development: with a good developer (This kind of drudgery is basically done by the administrator.
After the completion of the production of aluminum alloy signs, in order to avoid the occurrence of scratches, scratches, paint, fading, bumps and other phenomena on the surface of aluminum alloy signs during transportation or use, it is necessary to do a comprehensive product surface protection work.
Electroforming sign: the characteristics of electroforming is the biggest characteristic of sign making no carrier.
Sign color etching technique and the technology is available in stainless steel plate, titanium plate and other metal plating (
Especially the mirror metal)

Surface random henceforth have its official photos and all kinds of graphics, text, image, vivid, lifelike, amazing, fondle admiringly. One, the working condition at present, our country career in nameplate of the unit, according to online data is not completely calculated h
When making metal signs, stainless steel and aluminum are very common metal materials, so what is the difference between stainless steel signs made of them and aluminum signs?
Stainless steel plate has stable structure, firmness and durability, and is not easy to deform;
Stainless steel has strong corrosion resistance, acid and alkali resistance and oxidation resistance, and is not easy to rust.
In normal life, stainless steel signs can be seen everywhere.
no data

CONTACT US

Contact Person: Kelly Jiang

Fixed Line: +86-769-26627821

Fax: +86-769-22676697

Whatsapp / Phone: +86 139-2921-2779

Email: kelly.jiang@yfnameplate.com

Address: No. 46, Zhouwu Wenzhou Road, Dongcheng District, Dongguan City, Guangdong Province, China

BETTER TOUCH, BETTER BUSINESS.

Contact sales at YongFu Hardware.

Call Us

+86-13929212779

Copyright © 2025 Dongguan YongFu hardware Products Co., LTD | Sitemap
Customer service
detect