loading

Professional metal name plate manufacturer in China since 2006. DongGuan YongFu Hardware  Co., LTD

Email: kelly.jiang@yfnameplate.com

Zhaoqing hardware products electroforming factory-Design-Metal signage manufacturer

Zhaoqing process nickel standard electroforming factory design

In addition to the badge made of stainless steel, other materials must be electroplated. The commonly used electroplating is generally nickel plating, it is also the white steel color that we often say. This color is almost the same as the stainless steel color, so the customer mistakenly believes that it is a stainless steel badge. In the early days, it was made of metal materials such as gold, silver, copper, iron and tin, hence its name. In addition to metal materials, non-metallic materials such as plastics and glass fibers are widely used. According to the data of 'analysis report on development prospect and strategic planning of hardware products industry', in 2010, China's hardware products industry recovered throughout the year. In general, the hardware products industry is running well, the growth momentum of domestic and foreign sales is obvious, the import and export is growing at a high speed, and various economic indicators have basically returned to the previous level.

design of Zhaoqing craft nickel standard electroforming factory

during the '12th Five-Year Plan' period, China will change the development mode of hardware industry, on the premise of saving resources, reducing consumption, protecting the environment and improving the quality and efficiency of economic growth, we will continue to maintain an orderly, healthy and rapid growth of the industry, strive to transform China from a hardware manufacturing power to a hardware manufacturing power. In the early days, it was made of metal materials such as gold, silver, copper, iron and tin, hence its name.

Zhaoqing process nickel standard electroforming factory design, sand mold casting: low cost, small batch, can process complex shapes, but may require a large number of post-processing processes. Investment casting/lost wax casting: this processing method has high continuity and degree, and metal products can also be used to process complex shapes. On the premise of relatively low processing cost, it can achieve perfect surface effect and is suitable for mass production.

standardization factors with the continuous improvement of people's living standards, people have higher and higher requirements for visual design of signs; In the design of metal signs, it is not only required to be beautiful but also to reflect the information conveyed to people by the products of the enterprise, so that people can think of the Enterprise when they see the logo of the trademark, what kind of products are suitable for what style, what material of signs, so that people are more easy to remember; For example: Home appliances, electronic digital products, most of the choice of gold or silver logo, material selection: stainless steel or nickel material!

adhesive backing is not suitable for signs like split signs or signs with small lines. Adhesive backing has strong adhesion, good retention, strong temperature resistance and good waterproof performance, it is an environmentally friendly chemical. Four-dimensional glue commonly used in digital products, household appliances, furniture, mechanical equipment, car key chains and other products is a glue with strong viscosity among these common glues.

Zhaoqing process nickel standard electroforming factory design, metal plane signs are usually made by screen printing or color printing process, the metal signs made by the printing process are very colorful and very high-grade, however, there is also a disadvantage that the paint on the metal surface falls off due to external scraping during installation or transportation. Therefore, in this context, sign makers use a layer of film on the metal sign to protect the paint on the surface of the metal sign, remove the film when ensuring that the metal plate is 'safe. Metal flat signs are usually made by screen printing or color printing technology, and the metal signs made by printing technology are very colorful and high-grade, however, there is also a disadvantage that the paint on the metal surface falls off due to external scraping during installation or transportation.

The basic principle of electroforming is to use the original mold made according to the required shape as the cathode and the electroforming material as the anode, put them together in the same metal salt solution as the anode material and pass direct current. Under the action of electrolysis, a metal electroforming layer is gradually deposited on the surface of the original mold, and the metal electroforming layer is taken out of the solution after reaching the required thickness, and the electroforming layer is separated from the original mold, the metal parts corresponding to the shape of the original mold are obtained. The stability of nickel plating layer in air is very high. Due to the strong passivation ability of metal nickel, a very thin passivation film can be rapidly formed on the surface to resist the corrosion of atmosphere, alkali and some acids.

technological process of making nickel sheet label II. Cleaning steel plate and steel plate is the carrier when making nickel label, and the steel plate can be recycled, A plate can be repeatedly plated 2000 times, and each time it is reused, it must be cleaned and polished. Operation Guidance: The operator turns on the switch of the grinding machine and holds the stainless steel plate with both hands to make it close to the nylon wheel; Move left and right up and down, polish the stainless steel to make it bright and flat, and visually check the surface for nickel spots, letter marks and scraping. Polished stainless steel is placed in clear water to avoid oxidation of stainless steel plates.

Additionally, DongGuan ShunDing Hardware Products Co., LTD has a few new features planned to roll out in the app to provide more convenience, comfort and options to our clients.

At DongGuan ShunDing Hardware Products Co., LTD, we make sure everything we do honors that connection – from our commitment to the highest quality in the world, to the way we serve our customers and communities to do business responsibly. We are looking forward to becoming trusted supplier of every customer, inquire us at ShunDing Metal Nameplate!

We attach a great importance to domestic market and knows the importance factors of manufacturing Journalism, such as producing methods, etc.

Through our distribution and marketing competencies, DongGuan ShunDing Hardware Products Co., LTD provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the Journalism company of choice.

GET IN TOUCH WITH Us
recommended articles
INFO CENTERS APPLICATION News
Current is generated during the production of corrosion signs, and the corrosion process is a primary battery working process.
The brand factory is very worried about stainless steel materials? There are still two trading days left this month, which has reached the end of the month.
PVC film is characterized by soft texture and easy pasting.
There are many reasons for the impact of silk screen signs.
Just look at it and heat it to 15 ~ 30 degrees, 3 development: with a good developer (This kind of drudgery is basically done by the administrator.
After the completion of the production of aluminum alloy signs, in order to avoid the occurrence of scratches, scratches, paint, fading, bumps and other phenomena on the surface of aluminum alloy signs during transportation or use, it is necessary to do a comprehensive product surface protection work.
Electroforming sign: the characteristics of electroforming is the biggest characteristic of sign making no carrier.
Sign color etching technique and the technology is available in stainless steel plate, titanium plate and other metal plating (
Especially the mirror metal)

Surface random henceforth have its official photos and all kinds of graphics, text, image, vivid, lifelike, amazing, fondle admiringly. One, the working condition at present, our country career in nameplate of the unit, according to online data is not completely calculated h
When making metal signs, stainless steel and aluminum are very common metal materials, so what is the difference between stainless steel signs made of them and aluminum signs?
Stainless steel plate has stable structure, firmness and durability, and is not easy to deform;
Stainless steel has strong corrosion resistance, acid and alkali resistance and oxidation resistance, and is not easy to rust.
In normal life, stainless steel signs can be seen everywhere.
no data

CONTACT US

Contact Person: Kelly Jiang

Fixed Line: +86-769-26627821

Fax: +86-769-22676697

Whatsapp / Phone: +86 139-2921-2779

Email: kelly.jiang@yfnameplate.com

Address: No. 46, Zhouwu Wenzhou Road, Dongcheng District, Dongguan City, Guangdong Province, China

BETTER TOUCH, BETTER BUSINESS.

Contact sales at YongFu Hardware.

Call Us

+86-13929212779

Copyright © 2025 Dongguan YongFu hardware Products Co., LTD | Sitemap
Customer service
detect