Zhongshan metal signage wholesale factory professional-Metal signage manufacturer

by:ShunDing     2020-07-31
Zhongshan metal sign wholesale factory specializes in

More than 95% of badges are made by stamping and die casting technology, these two processes can be used to make some badges with a very three-dimensional feeling, especially die-casting is suitable for Super three-dimensional or 3D three-dimensional badges. Industry metal products industry also encountered some difficulties in the development process, such as single technology, low technical level, lack of equipment, shortage of talents, etc. , which restricted the development of metal products industry. To this end, we can improve the development of the metal products industry by improving the technical level of enterprises, introducing technical equipment, and cultivating suitable talents. In 2009, products in the metal products industry will tend to be more and more diversified, the technical level of the industry will be higher and higher, the product quality will be steadily improved, and the competition and market will be further rationalized. Hardware products auxiliary and accessory finished products used in daily life and industrial production.

standardization factors with the continuous improvement of people's living standards, people have higher and higher requirements for visual design of signs; In the design of metal signs, it is not only required to be beautiful but also to reflect the information conveyed to people by the products of the enterprise, so that people can think of the Enterprise when they see the logo of the trademark, what kind of products are suitable for what style, what material of signs, so that people are more easy to remember; For example: Home appliances, electronic digital products, most of the choice of gold or silver logo, material selection: stainless steel or nickel material!

Zhongshan metal label wholesale factory professional, Hot Melt Adhesive is a plastic adhesive, no viscosity at room temperature, it needs to be heated by a hot press to above 120 ℃, and the glue will be sticky only when dissolved, and it has no tasteless properties and belongs to environmentally friendly chemical products. It has the characteristics of high adhesion, strong adhesion, etc. It is often used on the surface of leather goods, digital products, household appliances, etc. , like double-sided tape, and is generally attached to the overall metal label, such as stainless steel signs, electroforming thick standards, etc!

The sign sign of the office building is the symbol of the modern sign guidance system as the static identification of the environment, it is an important indication of connecting people in daily life. Due to the multi-element alloy, the carbide Dispersion strengthening after solid solution strengthening and tempering is better, with high toughness, high impact fatigue resistance. Used for pneumatic tools, punching tools and large and medium-sized punching dies. The disadvantages are low compression resistance, poor thermal stability and difficult control of quenching deformation. For CrWzSi steel, when Shearing (Such as 5CrW2Si) High temperature heating quenching should be used as far as possible to change the shape of martensite and greatly improve its strength and toughness, which the author has achieved good results in practical work.

these signs that can be seen everywhere are made of different materials and processes, the focus of this article is also to introduce the material classification of signs and their main application fields, so that you can distinguish different materials when purchasing signs and have a general understanding of the process and cost. Plastic signs plastic signs we usually see outside electric cars, bicycles are used to plastic signs, hotels and other public places can also see a lot of plastic signs, as well as plastic business cards and so on. Plastic signs are generally made of plastic and screen printed.

The manufacturing process of nickel sheet thin standard is to use the cathode deposition phenomenon in the electrochemical process to carry out molding processing, that is, the conductive original mold is used as the cathode, the Electroformed Metal is used as the anode, and the metal salt solution of the electroforming material is used as the electroforming liquid. Under the action of direct current, the metal plate at the anode will gradually dissolve into metal ions, which will be continuously added to the electroforming solution to keep the concentration of the electroforming solution balanced.

high wear-resistant micro-deformation cold deformation die steel is represented by Cr12Mov type, which is a high-performance cold deformation die steel widely used abroad. Cr12Mov is an improved Cr12 steel. The carbon content is too high, resulting in serious uneven large bulk carbides. Cr12Mov steel is characterized by high wear resistance and hardenability. It is a micro-deformation cold blanking die. The main material of cold heading die is still widely used in general factories. The modified material has high hardness and high wear resistance, high hardenability, especially small deformation after heat treatment, good filing performance during pliers processing, is still widely used in blanking forming dies, drawing dies and other dies.

W18Cr4V (1220 ℃-Heating and quenching at 1250 ℃), W6Mo5Cr4V2 (Use 1170 ℃-1190 ° C) The mould treated by low temperature heating and quenching has high plastic deformation resistance, high hardness and wear resistance; There is enough blade property. Practice has proved that the punch quenched at low temperature can significantly prolong the service life and greatly reduce the fracture accident of the punch. Ductile cold deformation die steel some cold extrusion dies and cold heading Dies need to bear high strength and high impact toughness, while ordinary high speed steel and high carbon chromium rigid parts are easy to brittle break or break, and the dies need to have high strength and toughness, it can be divided into two categories: Carbon High speed steel: W series or Mo series high speed steel with carbon content reduced to 0. 5-0. 6%, increase the toughness of the treated steel.

Zhongshan metal label wholesale factory specializes in nickel electroforming products with a thickness of 0. Natural 20 ± 0. 05mm. Can provide model products, semi-finished products processing. Electroforming is a special processing method that uses the electrolytic deposition principle of metal to process some complicated or special shape workpieces. It is a special application of electroplating. Electroforming was mainly used for metal art and printing plates. It was used to manufacture record Stampers at the end of the 19th century. After that, the application scope gradually expanded.

after double-sided printing, put it into the oven to bake at a temperature of 105 ℃ for 15 minutes. Technological process of nickel sheet label production technological process of nickel sheet label production v. The baking operator puts the materials to be baked into the electric oven through the material rack for baking; 2. The temperature of the electric oven is set at 105 5 ℃ for 15 3 minutes; Keep the electric oven dry and clean.


DongGuan ShunDing Hardware Products Co., LTD has various branches in different countries worldwide.
We would appreciate your immediate attention to Journalism.
The key to Journalism is understanding where there is a problem or need in certain markets and knowing how to solve it.
Custom message
Chat Online
Chat Online
Chat Online inputting...
Joey
Joey
Echo
Echo
Alen.Chen
Alen.Chen
Sign in with: