Professional metal name plate manufacturer in China since 2006. DongGuan YongFu Hardware Co., LTD
Email: kelly.jiang@yfnameplate.com
Quanzhou conductive material manufacturer
punching: using special tools to cut a certain shape on the metal sheet can be applied in batch production. Punching: it is basically similar to the punching process. The difference is that the former uses the punching part, while the latter uses the rest of the metal sheet after punching. Shearing: cutting metal sheets by shearing is the same as cutting paper from the position by a pair of scissors. Chip Forming: when cutting metal, the cutting method of chip production is collectively referred to as chip forming, including milling, drilling, lathe processing, grinding, sawing and other processes.
The appearance design of metal signs should generally pay attention to various factors such as humanization, standardization, coordination between products and environment, etc, what are the factors that affect the appearance design of metal signs. Humanized factors the appearance design of metal signs should be combined with the actual situation, sensory vision, and design according to local conditions, reflecting the people-oriented concept and improving customer satisfaction, such: the sign design of scenic spots should reflect the service concept of humanization, individuation and characteristic on the whole and in detail, so as to greatly enhance the reputation of scenic spots.
Hot Melt Adhesive is a kind of plastic adhesive, which has no viscosity at normal temperature and needs to be heated to above 120 ℃ by a hot press, glue is sticky only when it dissolves and has odorless properties. It is an environmentally friendly chemical product. It has the characteristics of high adhesion, strong adhesion, etc. It is often used on the surface of leather goods, digital products, household appliances, etc. , like double-sided tape, and is generally attached to the overall metal label, such as stainless steel signs, electroforming thick standards, etc!
powder metallurgy is suitable for producing products with the same shape and large quantity, especially products with high processing cost such as gears. The production cost can be greatly reduced by powder metallurgy. Disadvantages: the size of parts should be considered without batch. The cost of the mold is relatively higher than that of the casting mold. Powder Metallurgy (P/M) Technology is an important material preparation and forming technology, which is called the key to solve the problems of high technology and new materials . . . . High performance, high performance, net near forming has always been an important research topic for powder metallurgy workers. Powder metallurgy method can realize less cutting and no cutting of workpieces. It is a high-quality, precise, low-consumption and energy-saving technology for manufacturing parts.
The identification signs of office buildings of Quanzhou conductive material manufacturers are the symbols of the modern identification guidance system as the static identification of the environment, it is an important indication of connecting people in daily life. Due to the multi-element alloy, the carbide Dispersion strengthening after solid solution strengthening and tempering is better, with high toughness, high impact fatigue resistance. Used for pneumatic tools, punching tools and large and medium-sized punching dies. The disadvantages are low compression resistance, poor thermal stability and difficult control of quenching deformation. For CrWzSi steel, when Shearing (Such as 5CrW2Si) High temperature heating quenching should be used as far as possible to change the shape of martensite and greatly improve its strength and toughness, which the author has achieved good results in practical work.
electroplating nickel crystal is extremely fine and has excellent polishing performance. The polished nickel coating can obtain a mirror-like luster appearance while maintaining its luster in the atmosphere for a long time. Therefore, the plating layer is often used for decoration. The hardness of nickel coating is relatively high, which can improve the wear resistance of product surface. Nickel plating layer is commonly used in printing industry to improve the hardness of lead surface.
Quanzhou conductive material manufacturer passes clean water after OK, and waits for full inspection after drying. The pickup operator removes the excess waste from the electroformed stainless steel surface, puts the steel plate in the material rack, and dips the material rack into the deinking tank. The temperature in the tank is kept at 45 ℃ ~ 60 ℃, soaking time 10 ~ 15 minutes. After OK, take it out and rinse the ink on the surface of the steel plate with clear water.
More than 95% of the badges are made by stamping and die casting processes. These two processes can make some badges with a very three-dimensional feeling, in particular, die-casting is suitable for ultra-stereoscopic or 3D badges. In addition to the badge made of stainless steel, other materials must be used. Other materials are electroplated. The commonly used plating is generally nickel plating, which is also the white steel color we often say, this color is almost the same as the stainless steel color, so the customer mistakenly believes that it is a stainless steel badge. Why are Badge manufacturers not very willing to recommend stainless steel badges?
DongGuan ShunDing Hardware Products Co., LTD is always trying to better understand the Journalism of innovation, so we can help companies lead the industries.
As a result, consumers will reward ShunDing with leadership sales, profit, and value creation, allowing our customers in which we live and work to prosper.
Even Journalism are being made fine with advanced equipment.
Diversifying is an excellent growth strategy, as it allows ShunDing to have multiple streams of income that can often fill seasonal voids and, of course, increase sales and profit margins.
DongGuan ShunDing Hardware Products Co., LTD harnesses science and technology to create products that support safer and healthier living and that enhance the overall quality of life.
CONTACT US
Contact Person: Kelly Jiang
Fixed Line: +86-769-26627821
Fax: +86-769-22676697
Whatsapp / Phone: +86 139-2921-2779
Email: kelly.jiang@yfnameplate.com
Address: No. 46, Zhouwu Wenzhou Road, Dongcheng District, Dongguan City, Guangdong Province, China
BETTER TOUCH, BETTER BUSINESS.
Contact sales at YongFu Hardware.
Call Us
+86-13929212779