Better Touch, Better Business.
Contact sales at ShunDing.
Shanxi nickel standard factory manufacturer- Design, why are the badge manufacturers not very willing to recommend stainless steel badges?
Why are Badge manufacturers not very willing to recommend stainless steel badges? In fact, the main point is that the accessories on the back of the stainless steel badge do not need to be welded with tin, but are usually glued. Imagine how fast the glued parts will be. There is no need to say more here. Sand mold casting: low cost, small batch, can process complex shapes, but may require a large number of post-processing procedures. Investment casting/lost wax casting: this processing method has high continuity and degree, and metal products can also be used to process complex shapes. On the premise of relatively low processing cost, it can achieve perfect surface effect and is suitable for mass production.
comparison of advantages and disadvantages between the two: stainless steel plate has stable structure, firmness and durability, and is not easy to deform; Stainless steel has strong corrosion resistance, acid and alkali resistance and oxidation resistance, and is not easy to rust. Aluminum plate is light in weight, unstable in structure, easy to deform and rust, poor in oxidation resistance and easy to corrode. The stainless steel material has a strong three-dimensional effect, and the surface style looks more upscale and is often used for high value-added commodity decoration.
Shanxi nickel standard factory manufacturer- Design
The sign sign of the office building is the symbol of the modern sign guidance system as the static identification of the environment, it is an important indication of connecting people in daily life. Due to the multi-element alloy, the carbide Dispersion strengthening after solid solution strengthening and tempering is better, with high toughness, high impact fatigue resistance. Used for pneumatic tools, punching tools and large and medium-sized punching dies. The disadvantages are low compression resistance, poor thermal stability and difficult control of quenching deformation. For CrWzSi steel, when Shearing (Such as 5CrW2Si) High temperature heating quenching should be used as far as possible to change the shape of martensite and greatly improve its strength and toughness, which the author has achieved good results in practical work.
Shanxi nickel standard factory manufacturer- The fabrication process of the designed nickel sheet thin target is to use the cathode deposition phenomenon in the electrochemical process to carry out the molding process, I . e. the conductive original mold is used as the cathode and the Electroformed Metal is used as the anode, using the metal salt solution of the electroforming material as the electroforming solution, under the action of direct current, the metal plate at the anode will gradually dissolve into metal ions, which will be continuously added to the electroforming solution, keep the concentration of electroforming solution balanced.
SiMnMo series Graphite Steel is characterized by high Si content. Under the action of strong graphitization element Si, some carbon exists in graphitization state, the steel has self-lubricating effect, high bite resistance, good machinability and wear resistance, small heat treatment deformation and stable size. SiMnMo steel is used to make bending, stretching and punching dies with strict surface quality requirements, which can significantly improve the quality of punching parts.
Shanxi nickel standard factory manufacturer- Design nickel electroforming products with a thickness of 0. Natural 20 ± 0. 05mm. Can provide model products, semi-finished products processing. Electroforming is a special processing method that uses the electrolytic deposition principle of metal to process some complicated or special shape workpieces. It is a special application of electroplating. Electroforming was mainly used for metal art and printing plates. It was used to manufacture record Stampers at the end of the 19th century. After that, the application scope gradually expanded.
after double-sided printing, put it into the oven to bake at a temperature of 105 ℃ for 15 minutes. Technological process of nickel sheet label production technological process of nickel sheet label production v. The baking operator puts the materials to be baked into the electric oven through the material rack for baking; 2. The temperature of the electric oven is set at 105 5 ℃ for 15 3 minutes; Keep the electric oven dry and clean.
nickel sheet label manufacturing process; Photosensitive development photosensitive: The operator first checks whether the film has yarn eyes and scratches, and the yarn eyes are in diameter of 0. Below 5MM and the scraping diameter is 0. Less than 2MM can be repaired with a black pen, and too large yarn holes and scratches are directly scrapped; Check the exposure machine glass for black spots and dust, and if any, clean it.
take a proper amount of 3M7533 glue, pour it on the screen board, and adjust the glue evenly with scraping to facilitate printing. Take a plate of electroforming thin standard and place it on the printing platform, cover the net plate, scrape it once on the net plate coated with glue, and return the glue once (Seal the glue at the printing position), Continuous printing twice. Take out the printed semi-finished products, place them on a drying rack, and then put them into an oven for baking at a temperature of 60 5 ℃ for 12 ~ 15 minutes.